Your Partnership in Systems Control
 
  • HOME
  • ABOUT US
  • PRODUCT
  • SOLUTIONS
  • SUPPORT & SERVICE
  • CONTACT US
 
Squirrel Cage Induction Motors
  Squirrel Cage Induction Motors
Series CT 
       Series CT

Series CT covers self ventilated machines with built on air-to-air heat exchanger. The heat exchanger consists of a bank of straight cooling tubes (Aluminium tubes are normally used. Different materials may be used upon request.) Ambient air is forced through the tubes by a shaft-mounted fan. Two internal shaft-mounted fans circulate the primary (internal) cooling air through the active parts of the machine and the tube bank.

       Series CR
       Series W / N / CB
  Synchronous Motors
       Series MS
Power Range: 150 - 25000 kW
200 - 33500 HP
Voltage: Up to 15000 V
Frequency: 50; 60 Hz
Frame Sizes: 315 to 1120;
10, 11, 12, 13
Number of Poles: 2 - 36
Standard Degree of Protection: IP 44
Cooling: IC 611
  High Speed Motors
       Series HS / HSMS
 
   
 Ask About This Product
E-mail Friend
   
   
   
     
Series CR  
Series CR covers self-ventilated machines with built on air-to-water heat exchanger. Water intake to the cooler is normally arranged on the left-hand side of the motor when facing the drive end, but can also be situated on the other side upon request. Standard type coolers are designed for a cooling water temperature at intake of 77°F and a water temperature rise of approximately 5K.    
Power Range: 150 - 25000 kW
200 - 33500 HP
Voltage: Up to 15000 V
Frequency: 50; 60 Hz
Frame Sizes: 315 to 1120;
10, 11, 12, 13
Number of Poles: 2 - 36
Standard Degree of Protection: IP 44
Cooling: IC 81 W
   
     
Series W / N / CB  
Series N covers drip-proof, self-ventilated machines. The cooling air is drawn from the ambient through the machines by two shaft-mounted fans. A splash-proof top hat efficiently protects the air intake and outlet openings. Series W covers weather protected, self-ventilated motors. The air, drawn in through a filter located in the top hat, enters the stator frame after three 90 degree changes in direction. In addition, an area of low air velocity prevents the moisture or dirt particles from being carried into the active parts of the motor.    
Power Range: 150 - 25000 kW
200 - 33500 HP
Voltage: Up to 15000 V
Frequency: 50; 60 Hz
Frame Sizes: 315 to 1120;
10, 11, 12, 13
Number of Poles: 2 - 36
Standard Degree of Protection: N = IP 23
W = IP W 24
Cooling: IC 01 CB and N not shown
   
   
 
Copyright @ 2005 All Rights Reserved