ROTA-SONDE DC 2000

Your Partnership in Systems Control

SENSORS

Hot Metal Detector

ROTA-SONDE DC 2000

HMD DC2000

Scanning system:
The detection field is scanned by a rotating polygonal mirror. When the analytical beam of the sensor detects infrared radiation from a hot product within the scanned field, the reflection of that radiation by the mirror onto the measuring cell provides a signal which is processed and a logic state is output as long as the product is within the field scanned by the detector.

HMD DC3000

Loop Scanner

TS2006

Accessories

Because of the exclusive optical scanning principle, the
ROTA-SONDE DC 2000 offers the following advantages :
- Easy alignment and reliable detection, regardless of the
transverse position of the product,thanks to the large
vertical field angle.
- Accurate detection because of the narrow lateral field
- Reliable detection due to the small analysing beam
All these features give accurate and reliable detection,
whatever the dimensions and the temperatureof the product,
or its distance and its position in the scanned field.

Radiant Bar BR3000

Ask About This Product

E-mail Friend

Features

Range of material temperature: 400 C / 750 F

Scanning angle:

DC 2010	10
DC 2030	30
DC 2050	50

Relay and static output

Response time : static output

DC 2010	1 ms
DC 2030	2 ms
DC 2050	4 ms

Ambient temperature : - 20 C / 0 F to 60 C / 140 F Up to 120 C / 250 F with water cooling.

Cast aluminium housing IP66 Optimum distance between sensor and the product to detect:

Wire 5 to 12 mm	0.2 to 3 m
Small bars 10 to 40 mm	0.2 to 4 m
Billet and small beam	0.5 to 6 m
Bloom	Over 2 m
Strip	0.6 to 2 m
Sheet	1 to 6 m
Heavy plate	1 to 8 m
Slab	Over 2 m