HIGH
VOLTAGE MOTORS |
 |
HIGH
VOLTAGE MOTORS |
H-compact |
|
H-compact |
| Maximum
power - minimum size |
|
H-compact
PLUS |
|
The
increasing significance of energy-saving,
environmental legislation, the desire
for even smaller dimensions and the
demands of domestic and international
markets have led to the further development
of the H-compact series that has proven
itself over the years. |
|
|
H-modyn |
|
A-modyn |
|
HS-modyn |
| |
|
|
Ask
About This Product |
|
E-mail
Friend |
H-compact
motors are used in the widest range of industry
sectors - such as oil & gas, paper, chemical
industry or steel. In these sectors, they
are used to drive compressors, blowers, refiners,
crushers and air separation systems.
H-compact is available in a version for direct
connection to the line supply and in a version
for converter operation.
H-compact is also available in an explosion-proof
version.
As a result of its innovative technology,
H-compact sets new standards for high-voltage
motors.
|
|
|
| |
|
|
| H-compact
- Customer benefits |
|
|
| |
Optimum efficiency and therefore lower operating
costs. |
|
|
| |
High power density and compact design result
in a lower space requirement and lower weight.
|
| |
Additional advantages include the reliable
bearing design as well as rotors with aluminum
die-cast cage for a high degree of reliability
and low additional losses (stray losses) |
| |
The bearings are designed for the highest
degree of reliability. In turn, this results
in excellent vibrational behavior, longer
lifetime and lower service & maintenance
costs. |
| |
The MICALASTIC® insulation with VPI impregnation
(temperature class F) guarantees a high degree
of reliability, a long lifetime and high load
capability when faults occur - e.g. when accelerating
or under overload conditions. |
| |
The noise level is low therefore complying
with the high demands of safety at work legislation. |
| H-compact
- Technical data overview |
|
|
| Brief
overview |
|
Water-cooled
motors: |
1300
kW – 1700 kW |
Force-ventilated
motors: |
200
kW – 3000 kW |
| Self-ventilated
motors: |
1000
kW – 3000 kW |
| Shaft
heights: |
315,
355, 400, 450, 500, 560, 630 mm |
| No.
of poles: |
2
– 12 poles |
| Rated
voltages: |
2
– 11 kV |
| Drive
converters: |
Line
supply and drive converter |
| Degree
of protection: |
IP55 |
| Cooling
type: |
IC411,
IC416, IC71W |
| Type
of construction: |
IM
B3, IM B35, V1 |
| Bearings: |
Roller
bearings, sleeve bearings |
| |
IEC,
EN, DIN, VDE |
| Regulations/Standards:
|
Explosion-protected versions available
Non-sparking (Ex n) Zone 2
Increased safety (Ex e) Zone 1, shaft
heights 315 - 400
Pressurized ( Ex pe II) Zone 1, shaft
heights 450 - 560 |
|
|
|
| H-compact
- typical applications |
|
|
Compressors
Fans
Blowers
Pumps
Conveyor systems
|
|
|
